Yapılan tez çalışmasında kitosan molekülü 26,66 Pa düşük basınç, 13,56 MHz Rf frekansta, 100 watt güç sağlanarak 30 dakika süreyle Rf- hidrazin plazması ile muamele edilmiştir. Kitosanın plazma muamelesinden sonra yapıdaki amin gruplarının artışı floresans etiketleme tekniği, elementel analiz ile değerlendirilmiştir. Kitosan (Ch) ve plazma muamele edilmiş kitosan (PMCh) moleküllerinin yapısal özellikleri Fourier Transform İnfrared Spektroskopisi (FTIR) ile aydınlatılmış, spektrumlara göre Rf plazma etkisinin molekül üzerinde herhangi bir halka açılması ya da bağ kopmasına sebep olmadığı görülmüştür. Ch ve PMCh moleküllerinin ısıl kararlılıkları termogravimetrik analiz (TGA) ile incelenmiş, PMCh yapısındaki nem absorpsiyonunun, fonksiyonel grup artışına bağlı olarak, yaklaşık üç kat fazla olduğu görülmüştür. Ch ve PMCh moleküllerinin, amonyum persülfat oksidantı ile kimyasal polimerleşme yöntemiyle sentezlenen poli(3,4 etilendioksitiyofen) (PEDOT) polimeri ile blendleri oluşturulmuş; polivinil alkol (PVA) desteği ile elektroeğirme sisteminde nanolifleri elde edilmiştir. Farklı oranlarda ve iki elektrot arası farklı uzaklık mesafelerinden elde edilen nanoliflerin morfolojisi taramalı elektron mikroskobu (SEM) ile aydınlatılmış; kimyasal yapıları FTIR ile incelenmiştir. Elektriksel iletkenlik değerleri dört nokta tekniği ile ölçülmüştür. Nanoliflerin elektrokimyasal davranışları ise dönüşümlü voltametri yöntemiyle incelenmiştir. Elektroeğirme yöntemiyle elde edilen nanoliflerden PMCh/PVA/PEDOT moleküllerinin lif çapı 170- 200 nm arasında, Ch/PVA/PEDOT moleküllerinin lif çapının ise 190- 246 nm arasında olduğu görülmüştür. Ch/PVA/PEDOT ve MCh/PVA/PEDOT blendlerinin gram pozitif bakterilere karşı etkinliği test dilmiştir. PMCh molekülünün ulunduğu blend yapısı daha yüksek antibakteriyel tkinlik göstermiştir. Anahtar Kelimeler: Kitosan, Plazma Modifikasyonu, Nanolif, Elektroeğirme, EDOT, Antibakteriyel, İletkenlik.
In this study chitosan molecules were modified using RF hydrazine plasma produced at low pressure (26.66 Pa) with 13.56 MHz frequency at a power of 100W for 30 min. Increase of amine groups in the molecule structure after plasma threatment were evaluated via florescence and elemental analysis. Structural properties of Chitosan (Ch) and plasma modified chitosan (PMCh) molecules were compared using Fourier Transform Infrared Spectroscopy (FTIR), from FTIR results indicated no effect of Rf plasma on the molecule whether any cause was the breaking of a bond or ring opening. Thermal properties of the Ch and PMCh molecules were investigated by thermogravimetric analysis (TGA) and it was obtained from TGA results that the moisture absorption is three times higher than that of PMCh structure. 3,4 ethylenedioxythiophene (EDOT) polymerized chemical polymerization method using ammonium persulfate oxidant. The Ch/PVA/PEDOT and PMCh/PVA/PEDOT blend nanofibers were obtained via electrospinning system with the support of poly vinyl alcohol (PVA). Morphology of blend nanofibers obtained at various ratios and different distances between two electrodes was determined with the scanning electron microscopy (SEM). Chemical bonds of blend nanofibers were investigated with FTIR, and conductivity was measured using a four point probe. Electrochemical behaviours of blend nanofibers were investigated using Cyclic Voltammetry. It was shown that nanofibers obtained from the method of electrospinning, fiber diameter of PMCh/PVA/PEDOT ranging from 170 to 200 nm and of Ch/PVA/PEDOT ranging from 190 to 246 nm. Activity against gram-positive bacteria were tested for Ch/PVA/PEDOT and PMCh/PVA/PEDOT blends. Blends of PMCh molecules showed a higher antibacterial activity. Keywords: Chitosan, Plasma Modification, Nanofiber, Electrospinning, PEDOT, Antibacterial, Conductivity.
Tez (Yüksek Lisans)- Süleyman Demirel Üniversitesi, Fen Bilimleri Enstitüsü, Kimya Anabilim Dalı, 2011.
Kaynakça var.
Yapılan tez çalışmasında kitosan molekülü 26,66 Pa düşük basınç, 13,56 MHz Rf frekansta, 100 watt güç sağlanarak 30 dakika süreyle Rf- hidrazin plazması ile muamele edilmiştir. Kitosanın plazma muamelesinden sonra yapıdaki amin gruplarının artışı floresans etiketleme tekniği, elementel analiz ile değerlendirilmiştir. Kitosan (Ch) ve plazma muamele edilmiş kitosan (PMCh) moleküllerinin yapısal özellikleri Fourier Transform İnfrared Spektroskopisi (FTIR) ile aydınlatılmış, spektrumlara göre Rf plazma etkisinin molekül üzerinde herhangi bir halka açılması ya da bağ kopmasına sebep olmadığı görülmüştür. Ch ve PMCh moleküllerinin ısıl kararlılıkları termogravimetrik analiz (TGA) ile incelenmiş, PMCh yapısındaki nem absorpsiyonunun, fonksiyonel grup artışına bağlı olarak, yaklaşık üç kat fazla olduğu görülmüştür. Ch ve PMCh moleküllerinin, amonyum persülfat oksidantı ile kimyasal polimerleşme yöntemiyle sentezlenen poli(3,4 etilendioksitiyofen) (PEDOT) polimeri ile blendleri oluşturulmuş; polivinil alkol (PVA) desteği ile elektroeğirme sisteminde nanolifleri elde edilmiştir. Farklı oranlarda ve iki elektrot arası farklı uzaklık mesafelerinden elde edilen nanoliflerin morfolojisi taramalı elektron mikroskobu (SEM) ile aydınlatılmış; kimyasal yapıları FTIR ile incelenmiştir. Elektriksel iletkenlik değerleri dört nokta tekniği ile ölçülmüştür. Nanoliflerin elektrokimyasal davranışları ise dönüşümlü voltametri yöntemiyle incelenmiştir. Elektroeğirme yöntemiyle elde edilen nanoliflerden PMCh/PVA/PEDOT moleküllerinin lif çapı 170- 200 nm arasında, Ch/PVA/PEDOT moleküllerinin lif çapının ise 190- 246 nm arasında olduğu görülmüştür. Ch/PVA/PEDOT ve MCh/PVA/PEDOT blendlerinin gram pozitif bakterilere karşı etkinliği test dilmiştir. PMCh molekülünün ulunduğu blend yapısı daha yüksek antibakteriyel tkinlik göstermiştir. Anahtar Kelimeler: Kitosan, Plazma Modifikasyonu, Nanolif, Elektroeğirme, EDOT, Antibakteriyel, İletkenlik.
In this study chitosan molecules were modified using RF hydrazine plasma produced at low pressure (26.66 Pa) with 13.56 MHz frequency at a power of 100W for 30 min. Increase of amine groups in the molecule structure after plasma threatment were evaluated via florescence and elemental analysis. Structural properties of Chitosan (Ch) and plasma modified chitosan (PMCh) molecules were compared using Fourier Transform Infrared Spectroscopy (FTIR), from FTIR results indicated no effect of Rf plasma on the molecule whether any cause was the breaking of a bond or ring opening. Thermal properties of the Ch and PMCh molecules were investigated by thermogravimetric analysis (TGA) and it was obtained from TGA results that the moisture absorption is three times higher than that of PMCh structure. 3,4 ethylenedioxythiophene (EDOT) polymerized chemical polymerization method using ammonium persulfate oxidant. The Ch/PVA/PEDOT and PMCh/PVA/PEDOT blend nanofibers were obtained via electrospinning system with the support of poly vinyl alcohol (PVA). Morphology of blend nanofibers obtained at various ratios and different distances between two electrodes was determined with the scanning electron microscopy (SEM). Chemical bonds of blend nanofibers were investigated with FTIR, and conductivity was measured using a four point probe. Electrochemical behaviours of blend nanofibers were investigated using Cyclic Voltammetry. It was shown that nanofibers obtained from the method of electrospinning, fiber diameter of PMCh/PVA/PEDOT ranging from 170 to 200 nm and of Ch/PVA/PEDOT ranging from 190 to 246 nm. Activity against gram-positive bacteria were tested for Ch/PVA/PEDOT and PMCh/PVA/PEDOT blends. Blends of PMCh molecules showed a higher antibacterial activity. Keywords: Chitosan, Plasma Modification, Nanofiber, Electrospinning, PEDOT, Antibacterial, Conductivity.