Bu tez çalışmasında saf nikelin yüzeyi Ekabor Ni tozu ile 900 °C sabit sıcaklıkta 3-5-8 saat süre ile katı ortamda borlanmıştır. Borlanmış ve borlanmamış numunelere çekme deneyleri yapılmış, akma dayanımı, çekme dayanımı, uzama miktarı ölçül-müştür. Borlanmış malzemelerin mikrosertlikleri ölçülmüş ve mikroyapıları ince-lenmiştir. Borlanmış ve borlanmamış malzemelerden elde edilen değerler karşılaştırı-larak borlamanın mekanik özelliklerde ne gibi kazanımlar sağladığı tespit edilmiştir.Borlanmış numunelerin borlanmamış numunelere göre çekme dayanımında %15,33 oranında bir azalma, uzama miktarında %41,06 oranında bir azalma, akma dayanı-mında ise %50 oranında artma görülmüştür. Borür tabakasının morfolojisi parmaksı yapıda gözlenmiştir. Anahtar Kelimeler: Saf nikel, Borlama, Mekanik Özellikler
In this study, the surface of pure nickel was pack boronized with Ekabor Ni powders at a temperature of 900 °C for a period of 3-5-8 hours. Tensile tests were conducted in order to determine the yield strength, tensile strength and elongation values in both untrreated and boronized samples. Microhardness measurements and microstructural comparisons of the boronized specimens were carried out. By comparing the results obtained from mechanical tests of both boronized and untreated materials, the possible advantages of the boronizing treatment were identified. Compared to the untreated specimens, the boronized specimens exhibited a 15.33% decrease in tensile strength, a 41.06% percent decrease in elongation, and a 50% increase in yield strength. Regardless of the boronizing duration the boride layer displayed a columnar morphology. Keywords : Pure Nickel, Boronizing, Mechanical Properties
Tez (Yüksek Lisans) - Süleyman Demirel Üniversitesi, Fen Bilimleri Enstitüsü, Makine Eğitimi Anabilim Dalı, 2012.
Kaynakça var.
Bu tez çalışmasında saf nikelin yüzeyi Ekabor Ni tozu ile 900 °C sabit sıcaklıkta 3-5-8 saat süre ile katı ortamda borlanmıştır. Borlanmış ve borlanmamış numunelere çekme deneyleri yapılmış, akma dayanımı, çekme dayanımı, uzama miktarı ölçül-müştür. Borlanmış malzemelerin mikrosertlikleri ölçülmüş ve mikroyapıları ince-lenmiştir. Borlanmış ve borlanmamış malzemelerden elde edilen değerler karşılaştırı-larak borlamanın mekanik özelliklerde ne gibi kazanımlar sağladığı tespit edilmiştir.Borlanmış numunelerin borlanmamış numunelere göre çekme dayanımında %15,33 oranında bir azalma, uzama miktarında %41,06 oranında bir azalma, akma dayanı-mında ise %50 oranında artma görülmüştür. Borür tabakasının morfolojisi parmaksı yapıda gözlenmiştir. Anahtar Kelimeler: Saf nikel, Borlama, Mekanik Özellikler
In this study, the surface of pure nickel was pack boronized with Ekabor Ni powders at a temperature of 900 °C for a period of 3-5-8 hours. Tensile tests were conducted in order to determine the yield strength, tensile strength and elongation values in both untrreated and boronized samples. Microhardness measurements and microstructural comparisons of the boronized specimens were carried out. By comparing the results obtained from mechanical tests of both boronized and untreated materials, the possible advantages of the boronizing treatment were identified. Compared to the untreated specimens, the boronized specimens exhibited a 15.33% decrease in tensile strength, a 41.06% percent decrease in elongation, and a 50% increase in yield strength. Regardless of the boronizing duration the boride layer displayed a columnar morphology. Keywords : Pure Nickel, Boronizing, Mechanical Properties