| dc.creator |
KALELİ, Emrullah Hakan |
|
| dc.creator |
DURAK, Ertuğrul |
|
| dc.creator |
Salman Nteziyaremye, Ozlem |
|
| dc.creator |
Simsek, Mithat |
|
| dc.creator |
TUNAY, Recai Fatih |
|
| dc.date |
2024-07-25T00:00:00Z |
|
| dc.date.accessioned |
2025-02-25T10:39:57Z |
|
| dc.date.available |
2025-02-25T10:39:57Z |
|
| dc.identifier |
e08600bd-55db-4060-8e54-622f366bf6f0 |
|
| dc.identifier |
10.2339/politeknik.1204731 |
|
| dc.identifier |
https://avesis.sdu.edu.tr/publication/details/e08600bd-55db-4060-8e54-622f366bf6f0/oai |
|
| dc.identifier.uri |
http://acikerisim.sdu.edu.tr/xmlui/handle/123456789/101652 |
|
| dc.description |
With the development of automotive technology, long life, high power, and low fuel consumption performance are expected from the internal combustion engine. This study investigated the effects of commercial oil additives on friction under different experimental conditions. In order to examine the friction effect, the samples prepared from the piston ring and cylinder were tested with the Reciprocating Test Rig at different speeds and loads. Using additives in the commercial oil lubricant showed a little reduction under the lower load. When the applied load increased commercial oil showed better friction coefficient performance in the experimental study. As for the expected results, the friction coefficient reduced with increasing sliding speeds under all conditions. In general, it was found that the commercial oil supplement did not have much effect on reducing the coefficient of friction when all the results were evaluated under these experimental conditions |
|
| dc.language |
eng |
|
| dc.rights |
info:eu-repo/semantics/openAccess |
|
| dc.title |
Experimental Analysis of Effect to Friction of Commercial Oil Additive Used in Automobiles |
|
| dc.type |
info:eu-repo/semantics/article |
|