| dc.creator |
CAGAN, Süleyman Cinar; MERSİN ÜNİVERSİTESİ |
|
| dc.creator |
BULDUM, Berat Barış; MERSİN ÜNİVERSİTESİ |
|
| dc.creator |
ÖZKUL, İskender; MERSİN ÜNİVERSİTESİ |
|
| dc.date |
2019-04-01T00:00:00Z |
|
| dc.date.accessioned |
2019-07-09T12:00:20Z |
|
| dc.date.available |
2019-07-09T12:00:20Z |
|
| dc.identifier |
http://dergipark.org.tr/sdufenbed/issue/39838/443411 |
|
| dc.identifier |
10.19113/sdufenbed.443411 |
|
| dc.identifier.uri |
http://acikerisim.sdu.edu.tr/xmlui/handle/123456789/46680 |
|
| dc.description |
Sonyıllarda, özellikle hafif metallerin işlenmesinde ve bu metallerin endüstrideuygulamalarına yönelik araştırmalarda önemli ölçüde artış olmuştur. Buçalışmada, AZ91D magnezyum alaşımı farklı parametrelerde (işleme ortamı, kesmehızı, kesme derinliği, ilerleme oranı ve kesici takım tiplerine) işlenmesisonrasında kuvvet, talaş tipleri ve kesici takım durumları incelenmiştir.Deneyler, Taguchi metodunun L18 ortogonal dizini kullanılaraktasarlanmıştır. Taguchimetodu sayesinde yapılması gereken deney sayısı azaltılarak zaman ve maliyettasarrufu sağlanmıştır. Ardından varyans analizi yapılarak tornalamaparametrelerinin kuvvet değerlerine olan etkisi elde edilmiştir. Varyansanalizi sonuçlarından kuvvet değerlerini etkileyen en önemli parametrelerinkesme derinliği ve ilerleme oranı olduğu belirlenmiştir. Sonuç olarak, yalnızcakesme hızının talaş tipinde önemli bir etkisinin olduğu görülmüştür. |
|
| dc.description |
Inrecent years, there has been an increase in research into industrialapplications, especially in the machining of lightweight metals. In this study,the effect of processing of AZ91D magnesium alloy in different parameters(machining medium, cutting speed, depth of cut, feed rate and cutting tooltypes) on theforce, chip formation and cutting tool conditions were investigated. Theexperiments were designed using the L18 orthogonal array of theTaguchi method. Thanks to the Taguchi method, time and cost savings wereachieved by reducing the number of tests required. Then, the effect of theturning parameters on the force values was obtained by analysis of variance.The most important parameters affecting the force values were the depth of cutand the feed rate. As a result, only the cutting speed has a significant effecton the chip type. |
|
| dc.format |
application/pdf |
|
| dc.language |
en |
|
| dc.publisher |
Süleyman Demirel University |
|
| dc.publisher |
Süleyman Demirel Üniversitesi |
|
| dc.relation |
http://dergipark.org.tr/download/article-file/700897 |
|
| dc.source |
Volume: 23, Issue: 1
119-125 |
en-US |
| dc.source |
1308-6529 |
|
| dc.subject |
AZ91D,Talaş oluşumu,Magnezyum alaşımı,Tornalama işlemi |
|
| dc.subject |
Chip formation,AZ91D,Magnesium alloy,Turning |
|
| dc.title |
Farklı İşleme Koşullarında AZ91D Magnezyum Alaşımının Tornalanmasında Talaş Morfolojisi |
en-US |
| dc.title |
Chip Morphology in Turning of AZ91D Magnesium Alloy under Different Machining Conditions |
en-US |
| dc.type |
info:eu-repo/semantics/article |
|