DSpace Repository

SATHİ KAPLAMALI YOLLARIN YAPISAL PERFORMANSININ DEĞERLENDİRİLMESİ

Show simple item record

dc.creator SARIOĞLU, Onur; SÜLEYMAN DEMİREL ÜNİVERSİTESİ
dc.creator SALTAN, Mehmet; SÜLEYMAN DEMİREL ÜNİVERSİTESİ
dc.date 2021-06-20T00:00:00Z
dc.date.accessioned 2021-12-03T11:45:44Z
dc.date.available 2021-12-03T11:45:44Z
dc.identifier https://dergipark.org.tr/tr/pub/jesd/issue/62893/884480
dc.identifier 10.21923/jesd.884480
dc.identifier.uri http://acikerisim.sdu.edu.tr/xmlui/handle/123456789/93732
dc.description Ülkemizde yolcu ve yük taşımacılığının büyük bir kısmı karayolu vasıtası ile sağlanmaktadır. Karayolu ulaşımında farklı üstyapı tipleri görülebilir. Bu tipler arasından karayollarında en çok tercih edileni bitümlü sıcak karışımlardır. Ancak bitümlü sıcak karışımların maliyetleri çok yüksektir. Sathi kaplamalı yollar, ilk yapım maliyetlerinin düşük, yolun trafiğe kapalı kalacağı sürenin az olması gibi nedenlerden dolayı gelişmekte olan ülkelerde en çok kullanılan yol türüdür. Bu çalışma, Isparta çevresindeki bazı sathi kaplamalı köy yollarını oluşturan tabakaların dayanımlarının ve yolların yapısal durumlarının tahribatsız deneyler ile incelenmesini içerir. Bu amaç için tahribatsız deneyler arasından, Dinamik Koni Penetrasyon ve Hafif Düşen Ağırlık Deflektometresi deneyleri tercih edilmiştir. Çalışmada, farklı zamanlardaki ölçümlerde elde edilen defleksiyon ve elastisite modülü değerleri ile sathi kaplama tabakalarının özellikleri ve sıkışma durumu araştırılmıştır. Dinamik Koni Penetrasyon deney aleti kullanılarak arazide yapılan ölçümler sonucu, üstyapı tabaka dayanımları saptanmıştır. Hafif Düşen Ağırlık Deflektometresi deneylerinden elde edilen sonuçlara göre defleksiyon değerlerinin arttığı, elastisite modülü değerlerinin düştüğü görülmüştür.
dc.description In our country, most of the passenger and load transportation is provided by highway. Different pavement types can be seen in highway transportation. Among these types, bituminous hot mixtures are the most preferred on highways. However, the costs of them are very high. Chip seal is the most used type of pavement in developing countries due to reasons such as low initial construction costs and the time that the road will be closed to traffic is short. This study includes investigation of the strength of the layers forming some village roads constructed as chip seal and structural conditions of them with nondestructive tests around Isparta. For this purpose, Dynamic Cone Penetrometer and Light Weight Deflectometer tests were preferred among the non-destructive tests. In the study, with the deflection and elasticity modulus values obtained by measurements at different times, properties and compaction states of layers of chip seals were investigated. As a result of measurements taken in the field using Dynamic Cone Penetrometer test device, the strength of pavement layers were determined. According to the results obtained from Light Weight Deflectometer tests, it was observed that the deflection values increased and the elasticity modulus values decreased.
dc.format application/pdf
dc.language tr
dc.publisher Süleyman Demirel Üniversitesi
dc.publisher Süleyman Demirel University
dc.relation https://dergipark.org.tr/tr/download/article-file/1593006
dc.source Volume: 9, Issue: 2 463-475 en-US
dc.source 1308-6693
dc.source Mühendislik Bilimleri ve Tasarım Dergisi
dc.subject Sathi kaplama,DCP,LWD,YAPISAL PERFORMANS
dc.subject Chip Seal,DCP,LWD,Structural Performance
dc.title SATHİ KAPLAMALI YOLLARIN YAPISAL PERFORMANSININ DEĞERLENDİRİLMESİ tr-TR
dc.title EVALUATION OF STRUCTURAL PERFORMANCE OF CHIP-SEAL PAVEMENT en-US
dc.type info:eu-repo/semantics/article
dc.citation Adams, J.M., Richard Kim, Y., 2014. Mean Profile Depth Analysis of Field and Laboratory Traffic-Loaded Chip Seal Surface Treatments. International Journal of Pavement Engineering, 15, 645-656.
dc.citation Bahia, H., Jenkins, K., Hanz, A., 2008. Performance Grading of Bitumen Emulsions for Sprayed Seals. 1st Sprayed Sealing Conferance.
dc.citation Baiz, S., 2007. Using Road Weather Information Systems (RWIS) to Optimize the Scheduling of Load Restrictions on Northern Ontario’s Low-Volume Highways. Yüksek Lisans Tezi. Waterloo Üniversitesi, Canada.
dc.citation Ese, D., Myre, J., Noss, P.M., Vaernes, E., 1994. The Use of Dynamic Cone Penetrometer (DCP) for Road Strengthening Design in Norway. International Conference on Bearing Capacity of Road and Airfield, 3–22.
dc.citation Gürer C., Çetin S., Karaşahin M., Akbulut H., 2011. Bir Sathi Kaplamalı Yol Üst Yapısının Taşıma Gücü Değişimlerinin Prima 100 ve Dynatest 3031 Hafif Düşen Ağırlık Deformasyon Ölçer Cihazları ile İncelenmesi. Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 1-12.
dc.citation Karaşahin M., Ağar E., 2004. Sathi Kaplamalar Üzerine Bir Değerlendirme. 4. Ulusal Asfalt Sempozyumu, 131-140.
dc.citation Karaşahin M., Gürer C., Sathi Kaplamalarının Performansına Etki Eden Parametrelerin İncelenmesi Ve Bir Performans Modeli Geliştirilmesi. Karayolları Genel Müdürlüğüne Verilmiş Brifing Notları.
dc.citation Kleyn, E.G., 1975. The Use of the Dynamic Cone Penetrometer (DCP). Transvaal Roads Department, Rep. No. 2/74, South Africa.
dc.citation Nageshwar R., Varghese G., Shivashankar R., 2008. PFWD, CBR and DCP Evaluation of Lateritic Subgrades of Dakshina Kannada, India. 12th International Conference of International Association for Computer Methods and Advances in Geomechanics (IACMAG), Goa, 4417-4423.
dc.citation Nazzal, M., 2003. Field Evaluation of in situ Test Technology for QC/QA Procedures during Construction of Pavement Layers and Embankments. Yüksek Lisans Tezi. Louisiana State Universitesi, Baton Rouge.
dc.citation Pratico F.G., Vaiana R., Iuele T., 2015. Macrotexture Modeling and Experimental Validation for Pavement Surface Treatments. Construction and Building Materials, 95, 658-666.
dc.citation Uz, V.E., Gökalp, İ., 2017. Farklı Tür Agregalarla Üretilen Yüzeysel Kaplamaların Kayma Direnci Performanslarının İncelenmesi. Çukurova Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 32(1), 109-120.
dc.citation Vonk, W., Korenstra, J., 2004. Geliştirilmiş Sathi Kaplamalar için SBS Modifiye Bitüm Emülsiyonu. 4. Ulusal Asfalt Sempozyumu Bildiriler Kitabı, 106-116.


Files in this item

Files Size Format View

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record

Search DSpace


Advanced Search

Browse

My Account