DSpace Repository

ESTIMATION OF INDUCTION MOTOR EQUIVALENT CIRCUIT PARAMETERS FOR VECTOR CONTROLLED DRIVES FROM MANUFACTURER DATASHEET

Show simple item record

dc.creator GÜLBAHÇE, Mehmet Onur; FATİH SULTAN MEHMET VAKIF ÜNİVERSİTESİ
dc.creator KARAASLAN, Muhammed Emin; FATİH SULTAN MEHMET VAKIF ÜNİVERSİTESİ
dc.date 2021-12-20T00:00:00Z
dc.date.accessioned 2022-05-10T10:56:44Z
dc.date.available 2022-05-10T10:56:44Z
dc.identifier https://dergipark.org.tr/tr/pub/jesd/issue/66319/953185
dc.identifier 10.21923/jesd.953185
dc.identifier.uri http://acikerisim.sdu.edu.tr/xmlui/handle/123456789/96127
dc.description In recent years, industrial developments have made it necessary to control induction motors used in both industrial and household applications in a wide-speed range. Thanks to vector control algorithms, in order to control the torque in a wide speed range operations with high performance, the equivalent circuit parameters of induction motor have to be known precisely. In this study, the estimation of the equivalent circuit parameters of the induction motor is implemented only with the limited information shared by the manufacturer’s datasheets. The estimation method is based on the principle of solving nonlinear equations derived from the equivalent circuit of an induction motor by Newton-Raphson method. The proposed equation set and solution algorithm have been tested for 20 different induction motors and presented in comparison with the experimentally obtained equivalent circuit parameters. Moreover, the speed-torque characteristics obtained experimentally and calculated from estimated equivalent circuit parameters for 4 different selected motors are compared and the performance of the proposed algorithm is examined.
dc.description Son yıllarda meydana gelen endüstriyel gelişmeler gerek endüstriyel gerekse ev tipi uygulamalarda kullanılan asenkron motorların geniş bir hız aralığında kontrol edilebilmesini zorunlu kılmıştır. Vektör kontrolü algoritmaları sayesinde hız ve moment kontrolünün geniş aralıkta yüksek başarımlı bir şekilde yapılabilmesi için asenkron motorun eşdeğer devre parametrelerinin yüksek doğrulukla bilinmesi gerekir. Bu çalışmada sadece üreticilerin veri föylerinde paylaşmış olduğu kısıtlı bilgiler ile asenkron motorun eşdeğer devre parametrelerinin tahmini gerçekleştirilmiştir. Tahmin yöntemi asenkron motorun eşdeğer devresinden türetilen doğrusal olmayan denklemlerin Newton-Raphson yöntemi ile çözülmesi ilkesine dayanmaktadır. Önerilen denklem sistemi ve çözüm algoritması 20 farklı asenkron motor için test edilmiş ve deneysel olarak elde edilen eşdeğer devre parametreleri ile karşılaştırmalı olarak sunulmuştur. Dahası seçilen 4 farklı motor için deneysel olarak elde edilen hız-moment karakteristiği ve kestirilen parametreler ile hesaplanan hız-moment karakteristiği verilerek önerilen algoritmanın başarımı irdelenmiştir.
dc.format application/pdf
dc.language tr
dc.publisher Süleyman Demirel Üniversitesi
dc.publisher Süleyman Demirel University
dc.relation https://dergipark.org.tr/tr/download/article-file/1827164
dc.source Volume: 9, Issue: 4 1372-1385 en-US
dc.source 1308-6693
dc.source Mühendislik Bilimleri ve Tasarım Dergisi
dc.subject Equivalent Circuit,Induction Motors,Parameter Estimation,Newton-Raphson Method,Vector Control
dc.subject Eşdeğer Devre,Asenkron Motorlar,Parametre Tahmini,Newton-Raphson Yöntemi,Vektör Kontrolü
dc.title ESTIMATION OF INDUCTION MOTOR EQUIVALENT CIRCUIT PARAMETERS FOR VECTOR CONTROLLED DRIVES FROM MANUFACTURER DATASHEET en-US
dc.title VEKTÖR KONTROLLÜ SÜRÜCÜLER İÇİN ASENKRON MOTOR EŞDEĞER DEVRE PARAMETRELERİNİN ÜRETİCİ VERİ FÖYLERİNDEN KESTİRİLMESİ tr-TR
dc.type info:eu-repo/semantics/article
dc.citation Abdelaziz, M. M., & El-Saadany, E. F. (2013, July). Estimation of induction motor single-cage model parameters from manufacturer data. In 2013 IEEE Power & Energy Society General Meeting (pp. 1-5). IEEE.
dc.citation Akram, S., & Ann, Q. U. (2015). Newton raphson method. International Journal of Scientific & Engineering Research, 6(7), 1748-1752.
dc.citation Al-Jufout, S. A., Al-Rousan, W. H., & Wang, C. (2018). Optimization of induction motor equivalent circuit parameter estimation based on manufacturer’s data. Energies, 11(7), 1792.
dc.citation Alonge, F., D'Ippolito, F., Ferrante, G., & Raimondi, F. M. (1998). Parameter identification of induction motor model using genetic algorithms. IEE Proceedings-Control Theory and Applications, 145(6), 587-593.
dc.citation Amaral, G. F. V., Baccarini, J. M. R., Coelho, F. C. R., & Baccarini, L. M. R. (2020). A High Precision Method for Induction Machine Parameters Estimation from Manufacturer Data. IEEE Transactions on Energy Conversion.
dc.citation Arslan, M. (2010). Diferansiyel evrim algoritması yardımıyla asenkron motor parametrelerinin belirlenmesi. Yüksek Lisans Tezi. Selçuk Üniversitesi Fen Bilimleri Enstitüsü.
dc.citation Aydeniz, M. G. (2005). Asenkron motorların hız algılayıcısız kontrolünde yeni bir algoritmanın geliştirilmesi ve uygulaması. Doktora Tezi. Yıldız Teknik Üniversitesi, Fen Bilimleri Enstitüsü.
dc.citation Bajrektarevic, Edina, "Parameter identification of induction motor using a genetic algorithm" (2002). Graduate Theses, Dissertations, and Problem Reports. 1217.
dc.citation Bingöl, O. Üç-Seviyeli Evirici ile Bir Asenkron Motorun Bulanık Mantık Tabanlı Vektör Kontrolü. Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 10(3), 452-459.
dc.citation Cirrincione, M., & Pucci, M. (2002, July). Experimental verification of a technique for the real-time identification of induction motors based on the recursive least-squares. In 7th International Workshop on Advanced Motion Control. Proceedings (Cat. No. 02TH8623) (pp. 326-334). IEEE.
dc.citation Çanakoğlu, A. İ., YETGİN, A. G., Temurtaş, H., & Turan, M. (2014). Induction motor parameter estimation using metaheuristic methods. Turkish Journal of Electrical Engineering & Computer Sciences, 22(5), 1177-1192.
dc.citation Çukur, R. (2015). Vektör Denetim Yönteminde İki Farklı Hız Gözlemcisinin Karşılaştırılması Ve Motor Parametrelerindeki Değişimlerin Denetim Performansına Etkisi. Yüksek Lisans Tezi. İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü.
dc.citation Diaz, A., Saltares, R., Rodriguez, C., Nunez, R. F., Ortiz-Rivera, E. I., & Gonzalez-Llorente, J. (2009, May). Induction motor equivalent circuit for dynamic simulation. In 2009 IEEE International Electric Machines and Drives Conference (pp. 858-863). IEEE.
dc.citation Fan, M., Chai, J., & Sun, X. (2014, October). Induction motor parameter identification based on T-model equivalent circuit. In 2014 17th International Conference on Electrical Machines and Systems (ICEMS) (pp. 2535-2539). IEEE.
dc.citation Gezer, A., Gülbahçe, M. O., & Kocabas, D. A. (2018). Generalised Model of Multiphase Tesla’s Egg of Columbus and Practical Analysis of 3-Phase Design. Electrica, 18(2), 151-158.
dc.citation Guasch-Pesquer, L., Youb, L., Jaramillo-Matta, A. A., González-Molina, F., & Barrado-Rodrigo, J. A. (2015, September). Parameters calculation of single-and double-cage models for induction motors from manufacturer data. In 2015 Intl Aegean Conference on Electrical Machines & Power Electronics (ACEMP), 2015 Intl Conference on Optimization of Electrical & Electronic Equipment (OPTIM) & 2015 Intl Symposium on Advanced Electromechanical Motion Systems (ELECTROMOTION) (pp. 237-242). IEEE.
dc.citation Haque, M. H. (2008). Determination of NEMA design induction motor parameters from manufacturer data. IEEE transactions on Energy conversion, 23(4), 997-1004.
dc.citation Kaygısız, F. (2008). Asenkron Makinaların Matlab’da Tasarımı ve Analizi. Yüksek Lisans Tezi. Dumlupınar Üniversitesi, Fen Bilimleri Enstitüsü.
dc.citation Lee, K., Frank, S., Sen, P. K., Polese, L. G., Alahmad, M., & Waters, C. (2012, September). Estimation of induction motor equivalent circuit parameters from nameplate data. In 2012 North American Power Symposium (NAPS) (pp. 1-6). IEEE.
dc.citation Lima, S. C., Wengerkievicz, C. A., Batistela, N. J., Sadowski, N., da Silva, P. A., & Beltrame, A. Y. (2017, November). Induction motor parameter estimation from manufacturer data using genetic algorithms and heuristic relationships. In 2017 Brazilian Power Electronics Conference (COBEP) (pp. 1-6). IEEE.
dc.citation Mohammadi, H. R., & Akhavan, A. (2014). Parameter estimation of three-phase induction motor using hybrid of genetic algorithm and particle swarm optimization. Journal of Engineering, 2014.
dc.citation Novotny, D. W., & Lipo, T. A. (1996). Vector control and dynamics of AC drives (Vol. 41). Oxford university press.
dc.citation Özköse, E. (2019). Newton-Raphson yöntemi ile rüzgar santrali için en iyilenmiş şebeke entegrasyonu. Yüksek Lisans Tezi. İstanbul Teknik Üniversitesi.
dc.citation Özyurt, Ç. H. (2005). Parameter and speed estimation on induction motors from manufactures data and measurements / [M.S. - Master of Science]. Middle East Technical University.
dc.citation Pedra, J. (2008). On the determination of induction motor parameters from manufacturer data for electromagnetic transient programs. IEEE Transactions on Power Systems, 23(4), 1709-1718.
dc.citation Stephan, J., Bodson, M., & Chiasson, J. (1994). Real-time estimation of the parameters and fluxes of induction motors. IEEE Transactions on industry applications, 30(3), 746-759.
dc.citation Susanto, J., & Islam, S. (2013, October). Estimation of induction motor parameters using hybrid algorithms for power system dynamic studies. In 2013 Australasian Universities Power Engineering Conference (AUPEC) (pp. 1-6). IEEE.
dc.citation Tang, J., Yang, Y., Blaabjerg, F., Chen, J., Diao, L., & Liu, Z. (2018). Parameter identification of inverter-fed induction motors: A Review. Energies, 11(9), 2194.
dc.citation Ukil, A., Bloch, R., & Andenna, A. (2011). Estimation of induction motor operating power factor from measured current and manufacturer data. IEEE transactions on energy conversion, 26(2), 699-706.
dc.citation Ursem, R. K., & Vadstrup, P. (2003, December). Parameter identification of induction motors using differential evolution. In The 2003 Congress on Evolutionary Computation, 2003. CEC'03. (Vol. 2, pp. 790-796). IEEE.
dc.citation Zorlu, S., Mergen, F. (2000) Elektrik Makineleri 2 Asenkron Makineler, Birsen Yayınevi
dc.citation Wengerkievicz, C. A., Elias, R. D. A., Batistela, N. J., Sadowski, N., Kuo-Peng, P., Lima, S. C., ... & Beltrame, A. Y. (2017). Estimation of three-phase induction motor equivalent circuit parameters from manufacturer catalog data. Journal of Microwaves, Optoelectronics and Electromagnetic Applications, 16(1), 90-107.
dc.citation Zheng, J., Wang, Y., Qin, X., & Zhang, X. (2008). An offline parameter identification method of induction motor. In 2008 7th World Congress on Intelligent Control and Automation.


Files in this item

Files Size Format View

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record

Search DSpace


Advanced Search

Browse

My Account