In composite plate shear walls–concrete filled (C-PSW/CF), there is an indeterminate flow of force between concrete, steel plate and tie bars. Finite element methods (FEM) are frequently used to verify this force flow. The theoretical models available in the literature to predict the tie bar maximum axial force demands were based on walls without boundary plates. The finding in this study is intended to help understand whether current theoretical approaches are conservative and can be applied to boundary plate walls as well. Within the scope of this study, tie bar axial force de-mands for walls with boundary plates consisting of planar and round shapes and without boundary plates were investigated and compared. For this, a previously benchmarked finite element (FE) wall model was considered and configured to have no boundary plate and have planar and round boundary plates. FE models were ana-lyzed under monotonic lateral displacement up to 4% drift ratio. Passive lateral pres-sures and transverse force variations on the planar and round boundary plates were investigated.