In this study, the reaction between lauric acid andmethanol in the presence of Amberlyst 36 was optimized using response surfacemethodology to maximize the conversion of the reaction. Effect of temperature(50, 57,5, 65 °C), alcohol:acid molar ratio (2:1, 4:1, 6:1), catalystconcentration (%1, %2, %3) on acid conversion were determined and membranereactor application was performed at optimized operation conditions. Theresults obtained in the batch and the membrane reactors were compared.Reactions were carried out for five hours. According to the numeric andoptimization analysis, it was observed that while the effect of catalyst onconversion was not remarkable, the effects of temperature and initial molarratio on conversion were significant. The highest conversions were obtained as77 % and 95 % at the batch reactor and membrane reactor respectively when themolar ratio was 6:1, catalyst concentration was 3 % (wt.) at 65 °C.Optimization results also confirmed that the highest conversion obtained athigher conditions except of catalyst amount. At the given conditions, higherthan 23 % conversion improvement was achieved by using the membrane reactor.
Bu çalışmada,yüzey yanıt yöntemi kullanılarak laurik asit ve metanolarasındaki esterleşme reaksiyonunun Amberlit 36 katalizörü varlığında optimumoperasyon koşulları verimi maksimize edecek şekilde belirlenmiştir. Laurik asitdönüşümüne sıcaklık (50 °C, 57.5 °C. 65 °C), alkol:asit molar besleme oranı(2:1, 4:1, 6:1), katalizör konsantrasyonunun (%1, %2, %3) etkileri belirlenmişve optimizasyon ile belirlenen noktada aynı reaksiyon membran reaktörde degerçekleştirilmiştir. Polivinil alkol membranın kullanıldığı tek kademelimembran reaktörde elde edilen sonuç ile kesikli reaktörde elde edilen dönüşümsonucu karşılaştırılmış ve membran reaktörün dönüşüme etkisi belirlenmiştir.Reaksiyonlar beş saat sürdürülmüştür. Hem parametrik hem de optimizasyon sonuçlarınagöre katalizör oranının dönüşüme etkisinin düşük olduğu, sıcaklık ve molarbesleme oranının ise asit dönüşümüne etkisinin yüksek olduğu görülmüştür. Enyüksek dönüşüm değeri % 77 ile 65 °C sıcaklıkta, alkol:asit molar besleme oranı6:1 iken, %3 katalizör oranı ile elde edilmiştir. Belirlenen bu koşullardamembran reaktör deneyinde ise dönüşüm değeri % 95 olarak elde edilmiştir.Membran reaktör kullanımı ile % 23 dönüşüm iyileştirilmesi gerçekleşmiştir.